How do I use the electric parking brake on my Lincoln?

You can activate and deactivate the electric parking brake by using the switch on the lower part of the instrument panel to the left-hand side of the steering wheel, or your center console as shown in the image below:

Image of the Electric Parking Brake switch located on the center console

Note: Instructions may vary. Refer to your Owner’s Manual for information specific to your vehicle.

Activating Your Electric Parking Brake

Pull the switch up to apply the electric parking brake. The red warning lamp flashes, then steadily illuminates when the brake is applied.

Note: You can apply the electric parking brake when the ignition is off.

Deactivating Your Electric Parking Brake

The electric parking brake can be released automatically or manually.

Automatic ReleaseManual Release
  1. Enter your vehicle.
  2. Close the driver's door.
  3. Switch the ignition on.
  4. Shift into gear.
  5. Press the accelerator pedal and pull away in a normal manner.

The red warning lamp will turn off.

  1. Enter your vehicle.
  2. Close the driver's door.
  3. Switch the ignition on.
  4. Press and hold the brake pedal.
  5. Push the switch down.

The red warning lamp will turn off.

Additional Resource

For more information about this feature, view the video below: